INSTALLATION
INSTRUCTIONS
Upon receipt of fixture and accessories
(packed separately) thoroughly inspect
for any freight damage which should be
brought to the attention of the delivery
carrier. Compare the catalog description
listed on the packing slip with the fixture
label on the inside of the housing to be
sure you have received the correct mer-
chandise.
TWP
Wall-Pak
IMPORTANT SAFETY
INSTRUCTIONS
(For Your Protection, Read Carefully)
• This fixture must be wired in accor-
dance with the National Electrical
Code and applicable local codes and
ordinances.
• Proper grounding is required to ensure
personal safety.
• Use approved connectors for all
electrical connections.
• ALL work should be done by a qualified
electrician.
• WARNING: NEVER disconnect any
component while power supply is
engaged.
Prior to Installation
Read carefully before installing light fixtures. If you do not understand these instructions, please
contact your local Lithonia distributor before installing.
INSTALLATION
1. Loosen the 2 stainless steel captive
screws in front housing and remove
front housing from fixture. Remove steel
component cover.
2. Mount fixture using dimensions shown
to the right.
3. Make supply connections (outlet box or
condulet tee, not provided). Replace
steel component cover and install lamp
following the lamp manufacturer’s
instructions.
4. Replace front housing and tighten the
two stainless steel captive screws.
SAVE THESE INSTRUCTIONS
LAMP INSTALLATION: Prior to installing the lamp in the fixture, check to be sure the lamp is of proper
type and wattage. Screw the lamp securely into the socket, back the lamp out one to two turns, then
screw the lamp back in, making sure it is secure. This properly seats the lamp in the socket.
WARNING: NEVER perform maintenance or cleaning while fixture is energized.
CAUTION: Observe lamp manufacturer’s recommendations and restrictions on lamp operation,
particularly ballast type, burning position, etc.
MAINTENANCE: Your Lithonia fixture is designed for years of trouble-free operation. For optimum
performance, periodically clean reflector and lens with a nonabrasive cleaner.
TROUBLESHOOTING: If this fixture fails to operate properly, check to make sure:
• The correct lamp is properly installed. • The fixture is wired correctly.
• The lamp is not faulty. • The fixture is grounded correctly.
• The line voltage at the fixture is correct. • The photocell is of proper voltage and wattage.
• There is no reflected light back into the photocell causing the fixture to turn off.
If all these variables have been checked and the fixture still does not operate properly, contact your
local Lithonia Lighting distributor.
Ó 1998 Lithonia Lighting, Rev 1/99
RJ52100231
TWP-INST.P65
7-3/4"
(19.7cm)
3/4" Threaded Hub
16-1/8"
(41cm)
15-7/16"
(39.2cm)
15-3/4"
(40cm)
VIEW OF BACK CASTING
15-1/4"
(38.8cm)
(1 pages)
(12 pages)
(1 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals